Device Details
Overview
| Name | Version: | randomRHYTHM 1.0 |
| Author: | collinj153 |
| Device Type: | MIDI Effect |
| Description: | randomRHYTHM is a recreation of a hardware module of the same name, without Swing, and with slightly expanded controls. There are two rhythm sections, A and B. The two sections contain four channels each. Each channel contains a slider that sets the probability that the note will be triggered and a subdivision amount. Channels 2, 3, and 4, on both rhythm sections can be independently delayed by a specified subdivision amount. DICE MODE Turn on Dice mode for each section and press the Roll button for a predefined set of random numbers that each channel will independently cycle through at the pace of the selected subdivision. The number of random numbers generated for each channel depends on the number of beats per measure. If you're in 4/4, then 4 random numbers will be generated for each channel. If you're in 11/4, 11 random numbers are generated for each channel, etc. |
Details
| Live Version Used: | 11.3.13 |
| Max Version Used: | 8.5.6 |
| Date Added: | Nov 05 2023 01:10:29 |
| Date Last Updated: | Nov 08 2023 19:03:54 |
| Downloads: | 0 |
|
Website:
|
https://collinjones.gumroad.com/l/ytxqz |
| ⓘ License: | None |
Average Rating
Log in to rate this device |
-n/a- |
Comments
Excellent work! Love it - thanks for sharing with us, will get plenty of use - great job
Posted on November 05 2023 by FreddyFingaz |
Report Issue
still digging this device! One thing I noticed - the state saving is partially functional but not 100%. When saving the device in a project, then re-opening, all of the notes reset to C-1
Posted on November 05 2023 by FreddyFingaz |
Report Issue
This is not functioning for me. Should be across the board C3 to start. The dice/roll doesn't function at all. It pauses intermittently. And while manually adjusting pitch, the audio becomes a cpu tornado of static and pops. On Live 10 Suite, Catalina OS.
Posted on November 05 2023 by irishmos |
Report Issue
@FreddyFingaz -
Yeah I haven't quite figured out state saving yet but if it's possible I'll figure it out! I'd recommend re downloading it if you haven't - I've updated it quite a few times since yesterday/this morning.
@Irishmos - I built the device with The most recent version of Ableton 11 Suite with the most recent version of M4L, so there may be some cross compat issues unfortunately. I don't have the crackling and popping issue when manually adjusting the note value. If you could upload a video to show me (youtube) that would help. I don't own a copy of Live 10 anymore otherwise I'd load the device to troubleshoot.
Yeah I haven't quite figured out state saving yet but if it's possible I'll figure it out! I'd recommend re downloading it if you haven't - I've updated it quite a few times since yesterday/this morning.
@Irishmos - I built the device with The most recent version of Ableton 11 Suite with the most recent version of M4L, so there may be some cross compat issues unfortunately. I don't have the crackling and popping issue when manually adjusting the note value. If you could upload a video to show me (youtube) that would help. I don't own a copy of Live 10 anymore otherwise I'd load the device to troubleshoot.
Posted on November 05 2023 by collinj153 |
Report Issue
@FreddyFingaz - I have added the ability to save the configured MIDI notes!
Posted on November 06 2023 by collinj153 |
Report Issue
Sweet! This device is so good!
Posted on November 06 2023 by FreddyFingaz |
Report Issue
Login to comment on this device.
Browse the full library