Device Details

wonder if this will work with my MKS-30?

:)

working great! thanks for this!!
is it possible call the presets?

Hi Steven,

I believe the MKS-30 kit has a different midi implementation. You can always fix that yourself, but i may be more tricky since all information is sent in only 2 CCs.
/Leumas

Dede,

Presets in Live can't be called upon like program changes. I don't know if anyone mange to make a m4l device for that. Some people are using the chain feature in instrument racks to be able to switch between live presets.

You could add a bangbang-button which will sent all parameters when depressed. Than you can have multiple instances av the controller in a live set an assign a key or button to each presets/controllers bangbang-button.

Or you can build a unique preset-storage into the controller.

Live presets work fine for me right know. We'll se what happens in the future :).

/L

can i still send the jx3p note messages to play music whilst using this?

"You could add a bangbang-button which will sent all parameters when depressed. Than you can have multiple instances av the controller in a live set an assign a key or button to each presets/controllers bangbang-button."

It could be nice so when you open a live set, your patch would be stored in the project itself :) If not you should move all the virtual pot to have it. Right?

Greetings. Must say a big THANK you for this. I was wondering about one of the parameters. Is there way to make the DCO tuner not jump in steps of a whole notes (the DCO on the JX3P is not limited this way) so I am wondering about how i might change that?

email is peters_road -at- yahoo. d-ot com

Hi leumas, I spent quite a while on upgrading your device to include storage and some other features, and then forgot about sharing it! Sorry for the delay, but I think you will like!

http://www.maxforlive.com/library/device/2902/jx3p-organix-mod-patch-editor-and-storage

Cheers

Hi this is great and works wonderful. My question is how do you know which midi CC controls which perameter? Like if I wanted to make my own controller using an arduino, i could program the specific cc to each knob/switch.

Can anybody confirm that this device will work on an unmodded JX-3P? From everything I have read, it doesn't accept SesEx messages. Thank you!