User Details

Username: Kuzma
Website: musickosmos.jimdo.com/
Facebook: www.facebook.com/kuzmakuznetsov
Twitter: twitter.com/KosmosDrawart
Soundcloud: www.soundcloud.com/kuzma-kuznetsov
Account Status: enabled
Member since: Sep 14 2014
About Kuzma:
(report this profile)

Devices by Kuzma

No devices have been posted by this user.


Comments by Kuzma

Comments

Opps! It is ok with automation. It was my live setup. Thank's for your amazing work!

I have found that automation of parameters hasn't recorded to clips or to global record. Is it technically possible to fix it?

Wow! It sounds great! Thank's for sharing! Is there some manual?

It is amazing! Thank's!

It is an amazing device! Thank's for sharing!
Is it technically possible to make also similar device for master solo/cue switch?

Great! Now, after this upgrade, it starts to work inside my big template.

BUT!!! when I start to play with it inside my project, I have found this issue:
when I moving from track to track inside session view when I have to play the clip on any track with eco, this track gives glide like delays on the notes every time when I make this move. And no matter what track it will be. Every time I have this sound effects.

Is it possible to fix it? Could you advice how to prevent it?

P.S. By the way, I have found that it is better to paste eco device into the rack after switching off target device because only in this case you will open it with off state.

Thank's for this great device!

Unfortunately, I have some issues with this device on Live 10.0.2:

1. The device didn't work on group tracks inside my huge template
(but it works onside basic template)
2. eCo-m on the midi tracks didn't start working inside my huge template. (but it works onside basic template)

Could you advise some way to fix it?
It is an amazing idea & I need it for my set up.

Thank's for sharing this awesome device! It will be amazing for live performance using if it will have a controllable presets number, separate stop buttons for L & R channel or separate mix for L& R to dynamically control appear of left & right pulsations in real-time. Have a nice day!

Great device! Thank's for sharing. Is it possible to make available to play this device by midi input?

Have a nice day!

Is it possible to add a dry/wet function to this amazing device?

Amazing device! I dream about a device like this, that could make a postponed start of the clips inside real-time performance with midi controllable parameters that give an opportunity to make the postponed start of the clips in real time by choosing a number of bars. Is it technically real? I hear that octotrack have similar functionality & I think it is the next step in real-time production.

Could you renew the link for "Sylenth1 (3.0) - Preset Bank Oscilloscope_V1"?
It isn't active. Thank's in advance!

Good day! Amazing device! Thank's for sharing! Is it possible to make the feature that fixes custom render screen position when user save and reopen the project? It is a great device, but so lazy to move that screen every time when I open the project. Have a nice day!

Amazing device! Thank's for sharing!

He-he! It is fun!

Good day! THank's for sharing! Inside live 10 on win 7 64 it makes my track without of sound when I paste it. Could you advice please how to fix it?

Exactly! Great device! Thank's for sharing!

Good day!
Great idea with a speed knob.
I really need this feature in my workflow, but this device on win 7 & live 10 records only last little part of the loop and also after pushing clear button hold last tone until I have switched off the device.
Also, when I have tried to use it, I didn't understand when it starts recording. Is it simultaneously with pushing record button or with project quantization?

I already make path corrections by few experiments with a scale object (On the advice of Chapelier Fou from forum)! Previous values range that I typed aren't true.

Now I think about android/iPad switcher.
Could you recommend objects to do that?

It seems that I have corrected only values of incoming indicators, but the values of the mappings still low. Could you advice how to make appropriate values range, please?

Good day! I have corrected xyz values in the editor to 0.10 & it starts work correctly with iPad. Thank's for your amazing work!

Good day! Now I try to use this device with iPad but Turn Map device shows me low values from an accelerometer. When I map it I, max value is 12. Could you advice how please is it possible to fix it?

Good day! Great device. I noticed that I should move knobs every time when I open project with this devices to hear the signal. I found the same case with x fade system crossfaders. Is there the way to fix it? It is mindblowing to keep it in mind every time.

Great device! Thank's for sharing! After switching channels on send device I have latched last sound on the channels. Is there a way to fix it?

Good day! Great device. Thank's for sharing! Is it possible to make switches mappable to macro & midi?

Good day! Sorry for the previous disinformation about 5 channel. I noticed that I should move A-B knobs of almost every send device every time when I open my project (it is a big template) to hear the channels & use it. Maybe you'll have some ideas on how to decide this case?

Good day! Thank's for sharing this magic device! I have only one issue: 5 receive channel didn't work. There is no signal after receive device with 5 channel. Is there a way to fix it? Win 7, live 10.

Also, I noticed those moments: Plastic & Rhythm are saving settings, but Dine- Yah & House_Bass aren't.

Hello! It sounds great! Thank's for sharing! Is it technically possible to make values midi or key mappable?

Great! Thank's!

It is great! Thank's for your work!

It is amazing! Thank's for sharing!

Good day! I have tried to map tempo of the project. It changed by the time but the tempo of the project actually didn't change. Could you advise how to fix it?

Great! Thank's for sharing. It is pure magic!

Good day!

Is it possible with "Transform stretch" to make midi stretch marker position controllable together with clip end marker?
I want it to speed up midi sequences clips during live performance near main tempo of the project.

Have a nice day!

I have tested it on live 10 & push 2 on the win 7. Eb.Scrubber switches global quantization to the different values if i use repeatings, so user should control this factor to avoid surprises during the performance.
Also, in my case, shift button didn't work.

I got it work with live 10. Will try! Thank's a lot! It is absolutely amazing!

Good day! Is it work with Ableton 10 on win? Could you advice how to set up this amazing stuff?

Good day!

Is it possible to use this amazing stuff with Ableton 10 and push 2? Could you advice how to setup it? It didn't start by tap button. Max devices opened. Where exactly I should puŠµ "Karma external"?

Have a nice day!

Good day! Thank's for your work. When I use it in live 10 under pc with min values there is start sounding very quick. Time random is 1000, Time stretching is 100. How to set it to basic value for smooth stretching from it.

Have a nice day!

Good day! Thank's for your work & works of previous authors. I have downloaded 2.3 version. I have one unpleasant case. Every time, when I change presets in Sylenth, my settings of microtuner stop working until I drag up & down PB range value. Could you advise how to fix it? Have a nice day!

Good day! I want to make Ableton looper records not to pitch up or down when I up & down the tempo of the project. Could this device make it possible if I'll paste it after looper?

It is amazing! Thank's for sharing!

I have moved this device to master channel & now it works fine in live 10.

Good day! Unfortunately, it crashes Ableton 10 on win 7 within a big template. I'm really upset because this device it is really great. Maybe you will have an idea how to fix it? Have a nice day!

Great device! Thank's for sharing! It will be great if this device wlll have mode that give possibilyty to make morphing by time to the left and to the right from the center.

Amazing device! It will be more useful if the main button will mappable.
For me for live performance sometimes important to use touch strip as pitch & sometimes as crossfade. Now I use for crossfade touch strip Arsenal functionality, but it is not very useful. If the main button of this device could be mappable it will be great for mapping to touchosc for example and use switching between touch strip function within jamming. Thank's for sharing!

Good day! It's a great idea, thank's for sharing! Could you advise please how to correctly use this device step by step!

Great device!
Thank you!
Am I right that on this device a can't map one action to several parameters (only if I'll use empty slots of main menu 1 or 2) Or there is some another way?

Have a nice day!

Is it technically possible to make an opportunity of some numbers of sets of midi mappings that can be selected by some Touchosc switcher? In this case functionality of this device became wider. Anyway, I have dreamt of this device! Respect!

Amazing device! Thank's!

I have seen that inside new reaper appears spectral editing (smooth, blur, sharpen and other) of selected zones of the spectrogram. Is it theoretically possible to make this opportunities by m4l functionality?

Is it possible to make it restored when will appear midi or audio signal on the track?

Thank's a lot! Great device!

Do you plan to make fader morphing from one state to another as possible with clyph x?

Thank's a lot!
But unfortunately it still didn't work.
Anybody know where it is possible to find proper fftw3.dll for Win 7 64 and how I should install it correctly?

Thank's
Kuzma

Hello! Great device! Unfortunately I looking trough opposite device. May be you know something? I need to push some notes by knob to kontrol some kontakt instruments articulation.
Kuzma

Hello!

Is it possible to use it on win7? I paste Audio to midi device to mic chanel and midi receptor ti synth chanel but it don't work. Could you advice what i should to do next?
Thank's
Kuzma

Hello!

Is it possible to use this device on win7 and how?

Thank's a lot
Kuzma

Thank's for this perfect device. Is there some way to store storage destination with project? Everytime when I open my project, I should set destination folder again.

Hello! Great work! Is it possible and how to use it with push controller!?