Device Details
Overview
| Name | Version: | steq 3.0 |
| Author: | mlostekk |
| Device Type: | MIDI Effect |
| Description: | This is the successor of the pure python based steq2.0 (http://www.youtube.com/watch?v=-jywWlDTmf0) This version is max4live based and runs with the official launchpad remote script. Just drop the max device onto a midi track. Here a quick introduction to the 3 sections of the device (a more detailed tutorial video will follow) INITIALIZATION: The dropdownbox is used to select the device you want to use to control the plugin The launchpad button is equivalent to the user mode 2 button on your launchpad and enables the device The mouse button enables the mouse control of the step sequencer to the right The rate knob allows adjustments of the update rate. The higher the rate, the more accurate the plugin, but the more cpu load it will need STEP SEQUENCER: This step sequencer is the main part of the device. It has 16 steps and maps to the launchpad via splitting the launchpad matrix into 2 parts. The upper and the lower half. The upper represents the first 8 steps, and the lower part the last 8 steps. There are 4 rows that can trigger an on or off value. Is an element in on state, the plugin will fire an on event if the step before was in off state and vice versa. The target of the on/off value, the transition between these two states and some further settings can be set in the row settings to the right ROW SETTINGS: First of all you can set a color for each of the rows, a separate color for the highlighted current step, and a separate color for the "rail row" of the step sequencer. The rail row index can also be specified. To switch between the customizable parts select a tab on top of the section Each of the main rows can trigger a different ableton parameter. Nearly all parameters are valid targets (mixer controls, device parameter controls etc). To map a parameter just click the "map" button and move the desired ableton parameter. If you want to disable the "map"-ping after the first parameter was changed and selected, hit "once" You can select the desired parameter also via the dropdown boxes. (to refresh the dropdown box hit "list") Select first the track, then the device and finally the parameter to bind to the rows on/off states The "curve", "comp" and "smooth" knobs allow a fine adjustments of the transition from between on/off states. The "init" button resets these parameters The "range", "min" and "max" controls allows you to adjust the range that the parameter will use for on/off states. The big fat "on" buttons enables or disables the automation of the target parameter FEATURES: launchpad user mode 2 init customizable row colors customizable step index highlight color customizable step rail row and color mouse control (be careful, full redraw of launchpad lasts longer with more led"s in on state) NOT YET IMPLEMENTED: proper color initialization sync row reset (reset a row to pure off states after a specified quantization) adjustable quantization unique python remote script for some optimizations transparent rail row color will overwrite the on/off states -> fix prepending step buffer to decrease delay effect |
Details
| Live Version Used: | 9.0.1 |
| Max Version Used: | 6 |
| Date Added: | Oct 19 2012 22:26:07 |
| Date Last Updated: | Jul 07 2020 18:47:10 |
| Downloads: | 6 |
| Website: | http://www.nomad5.com/data/max/steq3.0a.rar |
| ⓘ License: | Attribution |
Average Rating
Log in to rate this device |
-n/a- |
Comments
yeah cool! thx
Posted on October 22 2012 by dric |
Report Issue
The link to this device is broken. @mlostekk please fix it or I will have to delete this reference from the site. Thx.
Posted on April 18 2013 by synnack |
Report Issue
sorry! now with working link again!
Posted on April 19 2013 by mlostekk |
Report Issue
not work for me... i can go in user mode 2 and see the steps...but if i push pads nothing change :(
Posted on April 29 2013 by logritm123 |
Report Issue
mmhm.. i will doublecheck today again... i did some adjustments for live9 and max6.... will post here tonight!!!
Posted on April 29 2013 by mlostekk |
Report Issue
Any news about the fix for this? I also can see the steps, but nothing happens when I press buttons on the launchpad. Is there anything that we are doing wrong? Maybe some instructions would be good to provide.
Posted on April 06 2015 by mikebosch |
Report Issue
hey guys, sorry for the delay.
Unfortunately i am currently travelling without the launchpad, so no way to test the connection to the device. But some questions, did you assign a parameter to the rows? Did you select the launchpad in the dropdown box and enable the launchpad with the button "Launchpad" below? Is the stepper working without the launchpad (i could check that, and its working for me)
By the way, you can find my blogpost here http://www.martynmlostekk.pl/_crunchtime/steq3-0/
Unfortunately i am currently travelling without the launchpad, so no way to test the connection to the device. But some questions, did you assign a parameter to the rows? Did you select the launchpad in the dropdown box and enable the launchpad with the button "Launchpad" below? Is the stepper working without the launchpad (i could check that, and its working for me)
By the way, you can find my blogpost here http://www.martynmlostekk.pl/_crunchtime/steq3-0/
Posted on April 06 2015 by mlostekk |
Report Issue
Login to comment on this device.
Browse the full library