Device Details
Overview
Name | Version: | sound system setup 1.0 |
Author: | rbrt23 |
Device Type: | Audio Effect |
Description: | ..this is made for live-sound-engineers, it's an RTA and a DELAY-FINDER. DELAY-FINDER: the delay-finder can find the inherent delay of any system, including your soundcard by sending an impulse and measuring the time until the response arrives. it's not too accurate, about 2 ms jitter or so. to get more accuracy, use the built-in phase scope. workflow: -check the system by clicking the big button on the left. -hit the small 'take from response' - button to set the system latency. -enable 'align' left of the oscilloscope. -lower the numbers at 'system latency correction' SLOWLY until the oscilloscope shows an ascending, straight line. RTA: sports two curves with customizable colors and variable averaging. besides,the is a 'capture' function that captures the second (slower) curve. if you press 'inv' , the captured curve will be inverted,which is great for tuning the EQ of your system without having to send pink noise all over the place for ages. |
Details
Live Version Used: | 10.1 |
Max Version Used: | 8.0.7 |
Date Added: | Oct 12 2019 12:46:15 |
Date Last Updated: | No Updates |
Downloads: | 618 |
ⓘ License: | AttributionNonCommercialShareAlike |
Average Rating
Log in to rate this device |
-n/a- |
Files
Device File: | sound setup.amxd |
Comments
for best results, a measurement mic.
(measurement mic == the more linear the frequency response,the better)
actually, even cheap ones are pretty good,like the 'behringer ecm 8000.
..I did this device for my own purposes and didn't care too much about a smooth workflow, so I'd advise you to do some tests at home..
cheers
R
(measurement mic == the more linear the frequency response,the better)
actually, even cheap ones are pretty good,like the 'behringer ecm 8000.
..I did this device for my own purposes and didn't care too much about a smooth workflow, so I'd advise you to do some tests at home..
cheers
R
Posted on October 14 2019 by rbrt23 |
Report Issue
Cool!
I believe a friend has a mic like that.
looking forward to find out more about my pa's delay times
Going to set up some speakers in the shed first :-)
Have a nice one!
I believe a friend has a mic like that.
looking forward to find out more about my pa's delay times
Going to set up some speakers in the shed first :-)
Have a nice one!
Posted on October 15 2019 by fredZ |
Report Issue
Login to comment on this device.
Browse the full library
which mic should I use?